AN031 - Steps to insert the image file (LOGO) to be showed to the PMQ5CF power on
Document: | AN031 | ||
---|---|---|---|
Description: | Steps to insert the image file (LOGO) to be showed to the PMQ5CF power on | ||
Editor: | Gabriele Bazzi | ||
Approver: | Giuliano Tognon | ||
Link: | http://www.qem.eu/doku/doku.php/appnote/an031 | ||
Language: | English | ||
Document Release | Description | Note | Date |
01 | New manual | 05/08/2016 |
Introduction
This procedure allows the insertion of an image to be showed at the switching on of the PMQ5CF for the duration of the instrument initialization, via the USB port on the back of the controller MQ5CF.
Premise
Copy in the root (main folder) of the USB upgrade the LOGO.QNG file.
Procedure
-
Turn off the instrument.
-
Turn on the MQ5CF while holding down the
FUNC
on the back of the product, or theF1
button . -
To execute the function press and hold the
F7
button for 2 seconds or theBOOT
button on the back. -
When the procedure has finished, is showed Successful To report the correct execution.
PressingF1
orFUNC
, the MQ5CF is restarted.
The image file (LOGO) is loaded and the procedure is completed.